Find Scene camera settings in the Scene Settings.
Scene Settings > Camera EDIT



General settings

Field of view

Function: Increases the field of view in the viewer.
Options: 1 - 179
Default: 27

Rotation settings

Initial horizontal view

Function: Adjust the starting horizontal view.
Options: -180 - 180
Default: -35

Horizontal range

Function: Set the maximum distance the viewer can rotate horizontally.
Options: No limits to freezing the camera.
Default: Maximum distance

Initial vertical angle

Function: Adjust the starting vertical view.
Options: -180 - 180
Default: 15

Vertical range

Function: Set the maximum distance the viewer can rotate vertically.
Options: No limits to freezing the camera.
Default: Maximum distance.

Rotation speed

Function: Increases the speed that the viewer rotates.
Options: 0 - 1
Default: 0.12

Rotation inertia

Function: The amount the viewer rotates after the release.
Options: 0 - 1
Default: 0.85

Auto-rotation speed

Function: The viewer will continue to rotate on the selected speed.
Options: -1 (rotate left) - 1 (rotate right)
Default: 0

Zoom settings

Initial zoom

Function: The Initial distance the viewer is from the product when the 3D viewer is loaded.
Options: 0.1 - 10
Default: 1

Zoom speed

Function: Increases the speed the camera zooms in the viewer.
Options: 0.1 - 5
Default: 0.3

Zoom range

Function: Set the maximum distance the viewer can zoom in or out.
Options: No zoom to maximum zoom distance.
Was this article helpful?
Cancel
Thank you!